ANYCUBIC KOBRA MAX Lerdge Z board upgrade

this model is for everyone who had the same issues i hade with the poor firmware and ribbon cable construction i had

you will need:

-4 M3x10 screws

-8 M3x8 screws

-Lerdge Z board with extension module

-1 UEETEC Mosfet (you coud also modyfy the housing.step to work with the factory mosfet)

-bunch of 0.5mm2 cables

-some JST connectors

-the rest of the mounting hardware is already ther from the dissasambly

i wasnt able to include the loadcell in my build (wich isnt a big deal with teh lerdge Firmware, since you can do a manuel Mech leveling procedure).