Motorcycle Chain Oiler Block - 520, 525 & 530 Size

If you like this model and find it useful, you can support me in creating more by clicking on the Boost button above.

NOTE: I have uploaded STEP files of all models. To access them  you just have to click on "Download STL/CAD Files" and it will show the raw model files.

This handy tool attaches to the outside of motorcycle chain oil cans, and enables you easily oil the chain with one hand. It splits the oil path from the outlet tube into two and places the oil over the rings where it is supposed to go.

This massively reduces the mess and makes sure that the oil is placed in the correct location rather than being sprayed everywhere.

I have tested this design with both the largest and smallest diameter can that I could find and it works fine with both.

Simply tape the block onto the can with some strong tape and ensure that the outlet tube feeds into the block with no kinks.

There is a version available for each of the most popular chain sizes 520, 525 and 530, with the number on the top side for easy identification.

This could be printed with any filament, I have used both PLA and PETG and either works fine.