Search models, users, collections, and posts
G-Clamp C-Clamp
IP Report
Print Profile(5)
0.2mm layer, 2 walls, 15% infill
Designer
51 min
1 plate
0.2mm layer, 2 walls, 15% infill
Designer
56 min
1 plate
A1mini 0.2mm layer, 2 walls, 15% infill
Designer
2.4 h
2 plates
A1mini 0.2mm layer, 3 walls, 35% infill
Designer
2.6 h
2 plates
Click to see more
Open in Bambu Studio
Boost
510
1125
330
159
4.4 k
2.8 k
Released
Description
Description
Hey there,
This thing is a small clamp for holding items down.
The normal frame has a capacity of about 43 mm and is quiet strong. If the clamp is too short for your disered use, just print the long frame and screw or scale it up via your slicer! (remember to scale up every part by the same ammount!)
Please print all the parts with 100% infill for best thoughness.
Remeber: it's plastic and not as strong as metal!
I used Prusament PETG orange because I wanted the clamp to be able to bend.
Nozzle: 0.4
Layers: 0.2
Supports: none
License
This user content is licensed under a
Creative Commons Attribution
Comment & Rating (330)