Y-splitter connector - no hardware necessary by SirPrintAlot

SirPrintAlot

3D Printer>3D Printer Accessories

Print Profile(4)

All

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 15% infill

Designer

1.2 h

1 plate

4.8(89)

0.2mm layer, 2 walls, 15% infill

Designer

2 h

1 plate

4.9(21)

0.2mm layer, 2 walls, 15% infill

Designer

1.1 h

1 plate

5.0(4)

0.2mm layer, 2 walls, 15% infill

Designer

1.9 h

1 plate

Boost

224

362

171

818

586

Released

Description

This is a 100% 3D printable Y-connector/splitter solution for the Bambulab printers P1P, P1S or X1.

The only thing you will need is 30mm PTFE tube between the PTFE tube connector of your printer and the Y-connector/splitter, see the image (blue PTFE tube).

Remember to push the PTFE tube all the way inside the Y-splitter it must touch the inner “stops”.

The mounting plate is optional the Y-connector/splitter works just fine without it.

If you choose to use the mounting plate use the screws on the back, see frontpage image.

If you want a version without the mount print one of the two last print profiles.

If you need a 4 way splitter : https://makerworld.com/en/models/416254#profileId-318520

Hope you find the model usefull.

You can also see my other printable add-ons for the Bambulab printers:

https://makerworld.com/en/models/424181#profileId-327470 (Light weight poop chute (30g))

https://makerworld.com/en/models/213926#profileId-233439 (AMS button adapter with PTFE tube)

https://makerworld.com/en/models/402613#profileId-304285 (Dual purpose bed scraper)

https://makerworld.com/en/models/394761#profileId-295931 (If you need to connect two bowden/PTFE tubes)

https://makerworld.com/en/models/375898#profileId-275865 (Drybox IKEA samla 22l)

https://makerworld.com/en/models/404520#profileId-306293 (Purge strip bin for Bambu P1S)

Comment & Rating (171)

@user_378062490

Print Profile

0.2mm layer, 2 walls, 15% infill

gave it a 4star only because when clipped in, I have ams feed issues at this junction. that said, when not clipped to the bracket, my ams is not having issues ensure that your ptfe tubes are pushed all the way in to the "stop", otherwise filament will catch that "stop" and jam.

(Edited)

The designer has replied

@SirPrintALot_

Can you see why? I have not had any issues maybe the curve of the PTFE tube is too "sharp".

@SirPrintALot_

I have uploaded a new version of the mount that is 60o maybe that will solve your problem. (see raw model files: Y-splitter-Mount_60degrees)

(Edited)

@dethdeks

i noticed today that it did that as well to me. as soon as i unclipped it it fed right in and kinda binded up a slight bit but then popped in. figured it was just the way i cut the filament

(Edited)

@iamnotwhoiam

Print Profile

0.2mm layer, 2 walls, 15% infill

Printed out very nicely in PETG Clear. Attached to the printer and it's looking good so far.

The designer has replied

@SirPrintALot_

Looking nice very transparent filament!

@dominik.gneist

Print Profile

0.2mm layer, 2 walls, 15% infill

Good Design! Works good, the only "problem" is, the filament change makes scratching noises, but I did't noticed any affecting the print quality

The designer has replied

@SirPrintALot_

Hi, I have uploaded a version 2 that have a straight pass through for the AMS filament. That should have less friction between the inner surface and the filament - lower scratching noises. https://makerworld.com/en/models/443059#profileId-349090

@user_2742936673

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Of all the AMS splitters I've printed and tried, this one is as smooth as butter. For that, you've been Boosted!

(Edited)

The designer has replied

@SirPrintALot_

Nice to hear thank you, have made a new version if you are interested (tried to make it even smoother) : https://makerworld.com/en/models/443059#profileId-349090