the model is good. works with my checkbook. the supports are just a pain to remove though. very low clearance so you need to use fine tweezers.

Paul K

0.2mm layer, 2 walls, 15% infill

printed it twice, and I increased size by 5% the second time.  It doesn't fit a standard checkbook.

Slap Cracker Adventures !

Great idea and prints nice. Doesn’t fit a standard pad of checks. Starter pack maybe.

Stewart.blackwell

It printed fine, however it is too thin to hold my checkbook. 

cleveralias

Flawless, and a really easy print. Nicely done! 

RyanPKellyEsq

printed well just didn't fit my checkbook 

Majik

digbysmith13.stl

user_3698725617

user_2067750266

HodgePodge

LUCAS RACING LLC

cover

Screenshot 2024-03-22 185710_14e67352-8c52-4a21-9bb0-54f7cfe3238f.png

plate_1.png

IMG_7905_1e9d5578-8f9d-46b7-9450-46b4c5c5ff11.webp

plate_1.webp

Supports enabled! Ready to print :)

IMG_7905_b3a5357b-e80b-4fc9-9dad-3b01ab9949d2.webp

Standard Bambu lab preset with tree supports enabled.

Checkbook Cover

<boostme><boosttitle>Boost Me</boosttitle><boostcontent>&lt;3 For Free!</boostcontent></boostme><commercialme><commercialtitle>Membership</commercialtitle><commercialcontent>Looking for Commercial Licensing or just want to support me? Looking into these options. :)</commercialcontent></commercialme>Cover for an old school paper-check checkbook.&nbsp;Print-in-place hinges. Pressure fit to hold the checkbook in place. Might want to increase or decrease the scale by 1% per application.

Print Profile(2)

Description

Comment & Rating (14)

This remix is based on

License

Remixes (1)
(Created before license restrict)

Related Models