Airless Ping Pong no break Ball! Table Tennis - Free 3D Print Model

Search models, users, collections, and posts

filete3d

Hobby & DIY>Sport & Outdoors

IP Report

Print Profile(4)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

50 min

1 plate

4.6(394)

0.2mm layer, 2 walls, 15% infill

Designer

59 min

1 plate

4.2(33)

0.2mm layer, 2 walls,15% gyroid infill

50 min

1 plate

5.0(2)

0.6mm nozzle, 0.3mm layer, 4 walls, 25% infill

39 min

1 plate

4.0(9)

Open in Bambu Studio

Boost

765

1406

469

133

4.2 k

3.3 k

Released

Description

Membership

Want to sell these? Join to my Commercial Membership here on Maker World!

Join

Airless Ping Pong Ball, reinforced circle mesh!

Tested in basic PLA its approved to regular playing without major smashing, in wich case resistance is improved with PETG (or any other material with better layer adhesion or higher melting temperature such as ABS or Nylon)

Improved resistance, bouncing and weight approach

After some tests with hex meshes, we conclude that the circle mesh has greater resistance by better distributing the hitting response on the surface, this means that less plastic can be used to make the ball and in this way achieve a better weight match with the real ball.

Improved bounciness consistency

The circle mesh allows a better surface finish in the lower and upper critical areas of the print, this makes the direction of the bounces more regular. With a slight sanding in the support sector, a smooth surface is achieved throughout the geometry.

The print profiles already come with pre-loaded supports, make sure to view them correctly before printing, once printing is finished, wait a few minutes for the plate to cool to avoid deformations in the sphere.

Boost Me (for free)

If you enjoy this design, please consider giving it a boost! It helps me as a creator to continue making models for you!

If you'd like to sell this design, or many of my other exclusive designs, please subscribe to my patreon here:

https://www.patreon.com/filete3d

Check my current state on airless balls:

Airless Tennis Ball v2.0 https://makerworld.com/en/models/253687#profileId-270125

Airless Baseball Wiffle Softball Ball v2.0: https://makerworld.com/en/models/227359#profileId-244997

Airless Basket , Soccer, Voley or Handball Ball v1.2: https://makerworld.com/en/models/223189#profileId-241192

Airless Golf Ball: https://makerworld.com/en/models/383904#profileId-284030

Comment & Rating (469)

@Fin3dPrinting

Print Profile

0.2mm layer, 2 walls, 15% infill

amazing came off the build plat I bounced it and I was amazed how ell it bounced! I threw at the wall after a little and it broke 😭😭amazing model overall!! printed in PETG

(Edited)

@keoo73

can you please explain me how to make those supports as they are in the photo, I am new to this and I have not been able to understand how to make them to be able to print this type of products, thanks for your help.

(Edited)

@keoo73

Replying to @keoo73 :

i use orca slider

@Fin3dPrinting

all I did was use the existing print profile with Bambu studio. I would recommend Bambu studio. if you need any more help let me know!

(Edited)

@marieclaire.cil

i made a 200% version on my A1 mini and it still has boun

The designer has replied

@filete3d

awesome! gonna try it too

@user_3613431700

Print Profile

0.2mm layer, 2 walls, 15% infill

nice

@Bibo5175

Print Profile

0.2mm layer, 2 walls, 15% infill

printed out perfectly, the supports came off very easy, it bounces great on a paddle, it is decently strong in PLA but a stronger material would be better

The profile uploader has replied

@filete3d

thank you!, for casual playing with no smashing it will be fine, i still have the one that i printed the first with no cracks!

@user_3597452475

Print Profile

0.2mm layer, 2 walls, 15% infill

printed with MatterHackers TPU. At about 75% print completion, paused the print, put a bell inside the ball, and then resumed the print. Print finished without any problems.

@JustLovett0

Boosted

Great for cats. Throw a bell in it for an easy toy.

@evilinheaven

Print Profile

0.2mm layer, 2 walls, 15% infill

Petg version is not round. May add difficulty to the match.

The profile uploader has replied

@filete3d

hi there! they are the same file with different Profiles, it seems to be a deformation due to the print, for troubleshooting i recommend to be sure to remove the print only after the bed cooled down enough and reduce printing speed so the layers get time to cool and the filament get correctly placed over the first layers. If you try to print it again please tell me if something of this solved the problem!

(Edited)

@evilinheaven

Print Profile

0.2mm layer, 2 walls, 15% infill

White is PLA. Blue PETG. PETG one is not round...

@Lord_Zendrix

lol did it break

@bukenya

Print Profile

0.2mm layer, 2 walls, 15% infill

Good print. The support was easy to remove. Additinally there is some grinding needed to get the bottom area round.

@Miasma

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Nice print bounces well

License

If you want to use this model commercially, please join my membership.

Join Now

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.