50ml tube rack collection (from 2x4 - 2x6)
Print Profile(6)
Description
Boost Me (for free)
Thanks! ❤️
Thank you for considering my 50 mL lab rack model!
All racks are designed for 50 mL tubes (29.5 mm diameter) and have 15 mL tube slots (16.8 mm diameter) in-between. The 50 mL tubes should slide into the rack so that their lids are underneath the 15 mL tube lids. This is to avoid jamming when a rack is full.
I also added a trio of racks that have three 15 mL tube slots in the front.
| The rack only needs to be press fit, no clue should be required. When assembling the racks, lightly tap the pins into the corresponding holes. Be careful and tap evenly until the pins are flush. Also make sure to press fit the pins into the flat side of the bottom part, not into the feet. |
I recently created a 15 mL lab rack which can be found here!
I hope you enjoy this model! 😘
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (7)