This is a remix of Dani's Indoor Grow Tower. I have added a few features to the original files. First I added a barbed fitting to the 50mm shower head for a snug fit with .5 inch internal diameter tubing. Next I added lugs to the chimney module to prevent the shower head from sliding down the chimney. I also added screw holes to the 50mm modules to allow for more stability with taller towers. I expanded the tower lid to better fit 5 gallon buckets. Within the lid I also included a fill port and a cover with a pass through for the pump power, a bubler and/or a temp probe. Lastly I created a riser module (spacer) to allow for more distance between plants if desired. Thank you to the original creator of the tower and I hope you all enjoy the modifications. Happy printing and growing.

*The riser module has the same fitting as the lid. You can print a base module to fit on top of the riser. I will be adding a second version of the riser to avoid the plant pods from all lining up.