Search models, users, collections, and posts
Hammer TPU Head
IP Report
Print Profile(4)
0.2mm layer, 4 walls, 25% infill
3.4 h
2 plates
![[2Plate, MiniFriendly]: 0.24mm layer, 3 walls, 40% infill](https://makerworld.bblmw.com/makerworld/model/USa0e0cd340c0fe4/441862848/instance/2024-03-23_6c6d657f7a4e3.jpg?x-oss-process=image%2Fresize%2Cw_100%2Fformat%2Cwebp)
[2Plate, MiniFriendly]: 0.24mm layer, 3 walls, 40% infill
4.8 h
2 plates
Soft AND Hard (2 sides), 0.2mm layer, 2 walls, var. infill
2.2 h
2 plates
0.2mm layer, 4 walls, 25%H / 10%S infill (PLA/TPU4AMS)
2.4 h
2 plates
Open in Bambu Studio
Boost
941
2352
496
265
3.3 k
2.5 k
Released
Description
I had a need for a soft hammer when making some parts fit tight together, and then I made this little hammer/mallet with a hammer head made of TPU, where the one end is soft (40% infill), and the other end is a bit harder (80% infill)
I have included STL and 3MF files, with or without the H & S letters.
printed on BL X1C, with a 0.4mm nozzle, the shaft and wedge are made with PLA and the hammer head is made with TPU.
Enjoy and happy printing
Comment & Rating (496)