Raspberry Pi 4B Desktop Case with UPS - Free 3D Print Model

Search models, users, collections, and posts

PrintModz

Hobby & DIY>Electronics

IP Report

Print Profile(0)

Add the first print profile to earn points

Boost

109

289

208

Released

Description

A long time ago I saw a Raspberry Pi video, oh, here Raspberry Pi 3,4 - Gaming Case, and then I’m special I want to be a small computer of my own, I bought a Raspberry Pi and put it there to eat ashes, until I saw this Mini Raspberry Pi Server With Built In UPS, I have watched the video, but this file is chargeable, and I found that many people are saying why not speak from below, I was thinking , This attention is really good. Mini Desktop Case for Raspberry Pi 4 with Makerbase "UPS" 18650 Power Supply, I have seen this too, but I found out that it needs screws assemble, and it’s not It's transparent enough.
Feeling the inspiration they gave me, I started designing by myself. All the parameters are measured and printed again and again by myself, and then recalibrated. You can see my picture, the long row, all failed or there is questionable.
The initial design was that the oled and micro sd card were placed in the front, and it was found that the radiator and the oled would conflict, and then the position was adjusted.
At the beginning, the battery at the bottom could not be taken out. I knew that once the UPS Plus could not be shut down inexplicably, pressing the side switch did not work. There were indeed some problems. Then I quickly mentioned the function of taking the battery to emergency. If this problem occurs next time, I will have to remove all the screws and try again. It is really troublesome.In cooperation with mofada this case may be offered here.

CHECK MY OTHER DESIGNS: