Mugestsu - Final Getsuga Tenshō - Free 3D Print Model

Search models, users, collections, and posts

oasome

Generative 3D Model>Hueforge & Lithophane

IP Report

Print Profile(1)

All

X2D

H2D

H2S

P2S

H2C

P1P

A2L

X1E

P1S

H2D Pro

X1 Carbon

0.08mm layer, 2 walls, 100% infill

Designer

4 h

1 plate

Open in Bambu Studio

Boost

Released

Description

Fan art Mugestsu - Final Getsuga Tenshō

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x112.45mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.92mm

    #000000 PLA BambuLab Matte Charcoal Transmission Distance: 0.6
    #de4343 PLA BambuLab Matte Scarlet Red Transmission Distance: 2
    #ffe17f PLA BambuLab Matte Lemon Yellow Transmission Distance: 4
    #ffffff PLA BambuLab Matte Ivory White Transmission Distance: 3.5
This print uses 4 unique filaments

Swap Instructions:
    Start with Charcoal
    At layer #9 (0.8mm) swap to Scarlet Red
    At layer #13 (1.12mm) swap to Lemon Yellow
    At layer #20 (1.68mm) swap to Ivory White for the rest.

BLEACH

Ichigo

mugetsu