Makita Miter Saw Lock Lever 4576564 DLS211/LS1019

Did the locking mechanism on your Makita miter saw wear out or break? Save time and money by printing your own high-quality replacements! This model includes accurate replicas of two essential Makita OEM components used in the miter/bevel locking assemblies.

Included Components:

1. Lock Lever (OEM Part: 457656-4): The main lever used to engage and secure the saw's angle adjustments.
2. Lock Lever Plate / Sperrplatte (OEM Part: 345272-3): The internal securing plate that interfaces with the lever to lock the mechanism safely in place.

Confirmed Compatibility:
These parts are widely used across premium Makita corded and cordless miter saws, including:

• Corded Models: LS1019, LS1019L, LS1219, LS1219L, LS0714, LS1016L
• Cordless Models (LXT / XGT): DLS110, DLS111, DLS211, GSL03, GSL04, XSL04PTU

Print Settings & Recommendations:
Because these are mechanical parts under constant stress and friction, standard PLA is not recommended. For a long-lasting repair, please use the following settings:

Print Settings & Recommendations (Tested & Approved):
This model has been successfully tested with lightweight, material-saving settings while maintaining great structural stability.

• Infill: 20% (Gyroid pattern recommended for optimal multi-directional strength)
• Wall Thickness: 0.84 mm
• Wall Line Count: 2 perimeters
• Material: PETG-Rapid

Disclaimer: This is an aftermarket 3D-printed replacement. Use at your own risk. Ensure the mechanism locks 100% securely before operating your saw.