Adjustable Sprinkler for Garden and Vegetable Patch
Print Profile(1)
Description
Features:
Approximate range of up to 4 meters in diameter (depending on water pressure).
Works with common residential pressure.
Produces medium drops, reducing excessive mist and wind losses.
Diffuser adjustable via screw.
Direct connection for 1/2" hose.
Does not require clamps on most 1/2" hoses.
Support designed for 9 mm diameter rods or rebar.
Easy assembly and maintenance.
Optimized design for 3D printing.
Irrigation Adjustment:
The diffuser is attached to the sprinkler body using an M3 x 18 mm screw.
By adjusting the diffuser's height, it is possible to change the irrigation pattern:
Smaller opening: finer drops.
Larger opening: coarser drops.
Allows adjustments according to the needs of the crop or irrigated area.
Technical Specifications:
Water outlet angle: approximately 65°
Connection: 1/2" hose
Diffuser fastening: M3 x 18 mm screw
Support for rod/rebar: 9 mm
Maximum observed range: approximately 4 meters
Distribution system: fixed impact diffuser.
Assembly:
Connect the sprinkler to the 1/2" hose.
Attach the support to a 9 mm rod or rebar.
Install the diffuser using an M3 x 18 mm screw.
Adjust the diffuser's height according to the desired irrigation pattern.
Turn on the water and fine-tune the distribution.
Notes:
The range and distribution pattern may vary depending on water pressure, installation height, and diffuser adjustment.
The design was developed to offer a simple, economical, and efficient solution for irrigating small areas using easily found components.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)