ADVA FSP 150-XG120Pro Rack Ear Mounts

ADVA FSP 150-XG120Pro Rack Ear Mounts

Our ISP didn't ship rack mounts with our ADVA and were near impossible to find to buy separately so I modeled my own.

Not weight tested but printed in PLA they seem like they would be strong enough to hold the unit. But this is at your own risk.

The mounts are designed to fit around the metal lip on the top of the chassis and have an 18x18mm hole pattern to screw into the ADVA. Printed in Sunlu PLA I found the screw holes printed a touch too small and had to be enlarged slightly with a de-burring tool.

The mounts are 4mm thick and were measured for clearance on a standard DELL 42U rack, note that if your rack is exactly 4mm clearance each side your screws will need to sit fully in the recess for the unit to slide all the way in.

Hope this helps someone else out there one day!