Bob-omb Mario Bros Hitch Cover
Print Profile(1)
Description
Here is the second hitch cover in my Mario Bros series after the Mushroom. Here is Bob Omb!
Two bar models are offered for standard 2" and 1.25" trailer hitches (see specific model).
No AMS needed, more complex parts are printed in two pieces to facilitate printing.
Dimensions are approximately 200mm high by 120mm wide.
I printed mine in PETG. ASA could be a good alternative. Test the fit of the parts before gluing them to ensure a smooth assembly experience.
Assembly Steps:
1 - Position the fuse through the cap and glue it into the hole on top of the head
2 - Glue each leg into the holes under the body. Note that the legs are identified with a left and a right side, but they are identical.
3 - Glue the two sections of the crank / key together then insert the cylindrical part into the hole at the back under the space for the hitch bar.
4 - Glue the eyes (they are not identical, make sure the correct eye is glued into the correct hole).
5 - Glue the desired hitch bar. The pinholes should be closer to the free end of the bar (meaning the longer part without the hole should be glued onto Bob Omb).
There you go!
Share and like. Comment with photos of your setup!
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (0)