Squishy Medicine TPU Fidget - Stress Relief
Print Profile(1)
Description
About the Model
This half-pill-shaped squishy might actually be real medicine because of its abilities to help with stress relief. It is specifically engineered to provide an incredibly satisfying feel and sound experience. It gives you a perfect crunching sound and squish every single time you use it.
WARNING: DO NOT SWALLOW. IT IS NOT A PILL, ONLY SHAPED LIKE ONE.
Uses Up Filament Waste!
The inside is designed to hold your "printer poop," purged filament, failed print scraps, or small supports. By recycling your waste inside the model, you give the squishy a completely unique texture and sound while using wasted filament. The amount of squishiness can be changed by adding more or less waste to the inside. The amount of waste also changes the amount of “crunch”. Use filaments that are not squishy—like PLA and PETG—as the waste inside to have more crunch.
Recommended Print Settings
(Note: My official Print Profile already has all print settings and the pause command pre-configured)
- Material: TPU 95A (Required for the best combination of durability and squishiness)
- Layer Height: 0.2mm
- Infill Density: 5%
- Infill Pattern: Gyroid
- Bottom Shell Layers: 5
- Walls/Perimeters: 2 walls
- Supports: None! This model prints support-free.
How to Add Filament Waste
- Slice the model in your software.
- Add a pause print command at Layer 400 (unless you are using my print profile, where the pause is already there.)
- When the printer pauses, carefully pack your filament waste inside the half-pill chamber.
- CRITICAL: Make sure no waste is sticking out over the top edge of the walls.
- Resume the print to seal your filament waste inside
More Durable Than You Thought
The dome is secure at the top of the model and incredibly durable because of its double-dome design. This allows for the exterior to come out much cleaner because it uses the first internal dome as a support bridge. In between the two domes is a layer of infill.
Even More Durable
The model has a reinforced section at the bottom with infill. This allows you to pull the model off the print bed safely without ripping the bottom off like what happens in other weak squishy models. This section also allows for the bottom to stay intact for much longer when using the model so it lasts a long time.
Over Engineered
Has a hole at the top to allow air to escape when squishing it to allow an eaisier squish. The hole also helps when releasing grip of the squishy to help it reinflate faster.
![[video-to-gif output image]](https://makerworld.bblmw.com/makerworld/model/DSM00000002937117/design/34c31a1b-f8cc-4306-962c-84fef6de2a1c.gif?x-oss-process=image/format,webp)
GIF showing durability, strength, quick inflating, while also showing squishiness.
Boost Me (for free)
If you like saving filiment and the squish please boost, Thank You. P.S. Don't forget to read your bible.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including, but not limited to, publishing derivative works outside the Makerworld platform or hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money or collect fees. Subject to the above restrictions, derivative works may be published only within the Makerworld platform, and all such derivative works must be licensed under the same SDFL‑C license, without modification or additional terms. You may download the digital versions of this object, 3D print it, and display images, videos, or usage demonstrations of 3D printed versions of the object on personal social media platforms or Makerworld official channels, provided that no digital versions of the object are shared or distributed.
Comment & Rating (2)