Sipeed Lichee RV K230-CanMV Development Board Fully Adjustable Stand
Print Profile(1)
Description
Compatible Devices
A mechanical arm stand designed for the Sipeed Lichee RV K230-CanMV Development Board, compatible with its accompanying screen and original MIPI camera
Structural Design
Adjustment method: Screw-locking structure, allowing independent adjustment of three angles
- Camera pitch angle
- Tilt angle of the development board and screen assembly
- Tilt angle of the main body and arm
Length specification: Arm length 150mm, allows handheld operation
Base mounting holes are 14.9mm apart, with a hole diameter of 3.5mm
Can use original screws to replace the original acrylic panel
Note: To accommodate the screen, the lower-left part of the development board stand (where the pin header is located at the bottom) does not use standoffs; instead, M3 screws are screwed directly into the plastic. The lower-right part uses hexagonal standoffs
Model Features
- Integrated compatibility, screen, development board, and camera can be fixed simultaneously
- Multi-dimensional adjustable angles, with locating points on the arm for secure fastening
- 150mm extended mechanical arm for handheld shooting/debugging without obstructed view (if a shorter version is needed, it can be cut in slicing software; STEP source files are provided)
- Hollowed-out lightweight + fully chamfered structure, portable and hand-friendly
Applicable Scenarios
Embedded vision debugging, AI vision algorithm testing, outdoor image acquisition, on-site algorithm demonstration handheld shooting (maybe)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including, but not limited to, publishing derivative works outside the Makerworld platform or hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money or collect fees. Subject to the above restrictions, derivative works may be published only within the Makerworld platform, and all such derivative works must be licensed under the same SDFL‑C license, without modification or additional terms. You may download the digital versions of this object, 3D print it, and display images, videos, or usage demonstrations of 3D printed versions of the object on personal social media platforms or Makerworld official channels, provided that no digital versions of the object are shared or distributed.
Comment & Rating (0)