Scx30 1.3 wheels with hubs

Scx30 bead lock wheels created along with Peter from Little Line Killers.  These are 1.3, if you want 1.1s he has a file up on Cults3d under Little Line Killers.  His design also uses a hex style adapter where mine does not.  When bolting the wheel to the axle ensure you have the O-ring on the axle shaft to help it mate together.  This is designed to use the scx30 style wheel nut, the barrel is large enough to fit a scx24 style nut you would just need a narrow driver as the screws heads that attach the face to the barrel do not allow for much clearance.  I used 5mm screws to attach the barrel to the wheel face and 4mm screws for the bead locks.  The tires shown are the Injora pins in 44mm for a 0.7mm scx30 rim that are then cut to fit the 1.3 bead lock inner ring.  I printed this is PLA+2.0