Rotopax LOX Locking Pack Mount Cover - Free 3D Print Model

Search models, users, collections, and posts

dank8307

Hobby & DIY>Vehicles

IP Report

Print Profile(2)

All

H2D Pro

H2S

X1E

H2D

P2S

P1S

X2D

P1P

H2C

X1 Carbon

A2L

Rotopax LOX Mount Cover

Designer

1.7 h

1 plate

Rotopax LOX Mount Cover (low profile)

Designer

2.2 h

1 plate

Open in Bambu Studio

Boost

Released

Description

[UPDATE 6/17/2026: Uploaded the low profile version of the retaining clip. This design will reduce the likelihood of the clip getting caught on stuff like branches and flying off. The original version is still available for download. The new version will be beneficial if you mount your can on the exterior of your vehicle, whereas the original will be useful if you like to mount your can in a protected area, such as inside the truck bed.)

This is just a simple cover for the Rotopax RX-LOX-PM locking pack mount to keep the barrel lock free of debris.

One of the chief complaints about the Rotopax LOX mount is the fact that the barrel lock jams often, especially after being exposed to the elements. You can try lubricating the lock and the cylinder with the appropriate lube, but that will eventually wear off if the thing is left exposed.

This thing has two components:

Cover: Self-explanatory
Retaining clip: Keeps the cover from falling off

There are some tiny holes located through the model. Those are weep holes for any water that might get in through the gap between the cover and the handle. There's a little channel located inside the cover, and any water that enters should follow the channel and drain out from the weep holes.

Print Settings

Printer used: Bambu Labs A1 with enclosure

Nozzles used: Bambu Labs A1 0.4mm

Build plate used: CryoGrip Glacier (Engineering Plate selected in Bambu Studio) with Bambu Labs liquid glue

Filaments used: Inland/PolyMaker PolyLite ASA

Material: ASA

Nozzle: 0.4mm

Layer height: 0.2mm

Wall generator: Classic

Walls: 6 with embedding the wall into the infill

Top surface pattern: Rectilinear

Top shell layers: 5

Top shell thickness: 3mm

Bottom surface pattern: Rectilinear

Bottom shell layers: 5

Bottom shell thickness: 3mm

Internal solid infill pattern: Rectilinear

Sparse infill pattern: Gyroid with infill combination enabled

Sparse infill density: 25%

Supports: None required

Brim: None required

Usage Instructions

**Step 1: Observe the exposed LOX mount. Look at how pathetic and vulnerable it is, just waiting to screw you over when you need to access the fuel in the future.**

**Step 3: Slightly pull on the lips on the sides while pressing the center in to widen the clips and insert it into the center of the cover, and push it in until it clicks.**

**Step 4: Observe in awe as you no longer have to worry about the barrel lock jamming from being exposed to water and debris.**

**To remove: Pull on the side lips and press in on the center to widen the clip, and gently pull it out.**

Comment & Rating (0)

License

This user content is licensed under the MakerWorld Exclusive License.

You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.