Self-watering Pot Set – Size S

🪴 Self-watering Pot Set – Size S

Never forget to water again!

This self-watering pot set consists of an **inner pot** and an **outer pot** – an intelligent system that optimally supplies your plants with water through capillary action. Particularly suitable for **growing small tropical plants** in plant terrariums and display cases – ideal for Monstera, Philodendron, and similar tropical beauties! 🌿

How it works: A **4mm capillary wicking cord** connects the substrate in the inner pot with the water reservoir in the outer pot. The plant absorbs exactly as much water as it needs – no more and no less. Small drainage holes at the bottom ensure that the roots never stand in water and the plant stays healthy.

💡 **Tip:** 30 feet of wicking cord cost less than 5€ on Amazon – absolutely affordable!

The Set:

• 🪴 **Inner pot** – printed in clear PETG in **vase mode**, so you can observe root growth. The opening for the wick is deliberately designed to be slightly larger – this allows the inner pot to be easily removed even if the roots have already grown through the wick and the opening.
• 💧 **Outer pot** – best printed in **colored PETG** to slow down or completely prevent algae growth in the water reservoir. Thanks to the extra straight surface on the outside, the water level can still be easily read at any time!

Size S:

• Outer diameter: 50mm
• Height: approx 65mm
• Wick: 4mm capillary wicking cord

Print Settings:

• Material: **PETG** (highly recommended for moisture resistance!)
• Outer pot: 0.28mm layer height, slow speed for maximum transparency
• Inner pot: Vase mode
• Print bed: 80°C
• Nozzle: 250°C
• **Z-Seam:** Contour type, 10% gap, 20mm length

Also check out my other pots: https://makerworld.com/en/collections/28234046-self-watering-pots