IKEA PERSHULT - AMS 2 Wall Mount

Wall Mount Adapter for IKEA PERSHULT and Bambu Lab AMS 2 Pro

This adapter is designed to use the IKEA PERSHULT bracket as a wall-mounted support for the Bambu Lab AMS 2 Pro.

It is a practical solution for freeing up desk space and keeping your AMS 2 Pro neatly mounted on the wall next to your printer. The design allows the PERSHULT bracket to act as the main structural support, while this printed part helps adapt it properly for the AMS 2 Pro.

The piece is simple, functional, and ideal for compact 3D printing setups where organization and space saving are important.

Main features

• Designed for the Bambu Lab AMS 2 Pro
• Compatible with IKEA PERSHULT brackets
• Allows wall mounting of the AMS 2 Pro
• Helps free up desk space
• Clean and minimal design
• Easy to print and install

Hardware required

You will need M3 screws to attach the IKEA PERSHULT bracket to the printed adapter.
Make sure the PERSHULT bracket is securely mounted to a solid wall and use screws and wall plugs suitable for your wall type.

For best results, I recommend printing this part in a strong material such as PETG, ABS, or ASA, especially if the AMS 2 Pro will remain loaded with filament for long periods.

Disclaimer: This model is not affiliated with or endorsed by IKEA or Bambu Lab. It is a compatible accessory designed to improve the installation of the AMS 2 Pro.

🧡 Thanks for downloading!
If you like this model, please rate ⭐⭐⭐⭐⭐ and share it.
Optimized for easy FDM printing.
Happy printing!

👉 Check out my other 3D models here:

https://makerworld.com/es/@kratemis/upload