Lily Flower Wall Art panels
Print Profile(1)
Description
Boost Me (for free)
If you want to support my projects, I would be grateful. Thank you
Please read the instructions before printing
Item description:
This is a set of triptych wall decorations, featuring a refined minimalist botanical design with lily (Lily) motifs and clean geometric lines
The three side-by-side panels create a unique continuous floral composition, ideal for enhancing walls in modern and contemporary living rooms, bedrooms, or hallways
I placed holes at the top and bottom so they can be precisely hung with small nails
Print instructions:
Printed in Bambulab Black PLA
Printing is very easy and uses only 56 grams of filament in total (1.60 millimeters thickness)
The colors can be changed from the slicer at the time of printing, the model can be enlarged or reduced as desired. Usually 1.60 mm thickness is more than sufficient. So if you enlarge it on the x and y axes, keep the "Uniform scale" function active, then to vary the thickness, uncheck "Uniform scale" and act only on the z-axis value which you will set to the desired millimeters (I set 1.60 mm and it works perfectly)
GENERAL TIPS
A tip I always give is to first clean the print bed with dish soap and a sponge, rinsing with hot water, then drying it with compressed air, avoiding touching the surface with your hands. I also recommend performing the dynamic flow and flow rate calibrations provided in Bambu Studio. Personally, before printing, I dry the PLA with AMS 2 PRO for about 1 hour. These small measures, along with many others, determine the success of a good print
Before leaving negative reviews, please adjust these parameters. If you have difficulties or continue to experience problems, do not hesitate to contact me; we will find solutions together in a perfect collaborative atmosphere. I have made several prints of this object and they all came out perfect as in the photos: if you have incorrect parameters, dirty or clogged nozzles, poorly calibrated machines, humid or poor quality filaments, do not blame me.
PRINT INSTRUCTIONS:
Layer height 0.2 mm
Initial layer height 0.2 mm
Seam position aligned
Wall loops 2
Top shell layers 5
Bottom shell layers 3
NO supports
Infill 15 %
Infill pattern Grid
Outer wall speed 200 mm/s
Inner wall speed 300 mm/s
Normal print acceleration 10,000 mm/s
Outer wall acceleration 10,000 mm/s
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (1)