The Bralento Ritual Tower

The Bralento Ritual Tower – Slim Monolith is a minimalist, enclosed incense burner designed as an elegant and exclusive ritual object for modern interiors.

The incense stick sits protected inside the tower. The smoke collects within the chamber and exits smoothly through the Smoke-Cap, creating a slow, atmospheric, and refined smoke effect instead of the usual open-burning look. A hidden rear airflow opening allows the incense stick to burn reliably while preserving a clean front view and steady smoke behavior. As a welcome side effect, the controlled airflow may also extend the burning time of your incense stick, depending on the incense type and material.

The model consists of:

• Tower
• Base
• optional Signature Label
• separate B-Inlay

The Signature Label is optional, but honestly: print it. It gives the tower that extra premium detail — and yes, it looks really good. For the best smoke effect, I recommend using high-quality incense sticks. Very cheap, mass-produced incense can create excessive smoke, resin, or residue, which may compromise the clean and elegant smoke effect this design is built for. The model is designed to print completely without supports and has been thoroughly tested over several days with various incense sticks.

Print Notes

Tower

Print upside down.

Smoke-Cap / closed top side on the print bed
Support: off

Base

Print normally on the print bed.

Support: off

Signature Label

Print flat on the print bed.

Support: off

B-Inlay

Print flat on the print bed.

Support: off

Recommended Settings

Tower / Base

Layer height:
0.20 mm for high quality
0.24 mm for a faster print

Wall loops:
3 for a stable quality version
2 possible for a faster version

Infill:
10–15 %

Material:
PLA / PLA Matte tested

Signature Label / B-Inlay

0.12 mm Extra Fine recommended
0.4 mm nozzle works fine

Safety Note

This model was developed and tested using standard PLA, proving completely reliable during practical testing. However, never leave burning incense unattended. Use only on a stable, heat-resistant surface and keep away from flammable materials such as curtains, paper, or furniture. Allow the model to cool down completely after use.

Chinese Description / Chinese Description

Bralento Ritual Tower – Slim Monolith is a minimalist, elegant, and premium enclosed incense burner.

The incense stick is placed inside the tower body, and the smoke first slowly gathers within the internal space before being smoothly released through the top Smoke-Cap, creating a quiet, gentle, and atmospheric smoke effect.

The hidden rear Airflow inlet provides stable airflow for the incense stick while maintaining a clean front appearance. Depending on the incense stick's material and type, the controlled airflow may also result in a slower, more prolonged burning effect.

The model contains:

• Tower / Tower body
• Base / Base
• Optional Signature Label / identification label
• Separate B-Inlay / B-shaped inlay

The Signature Label is an optional component, but it is strongly recommended to print and install it. It makes the overall appearance more complete and adds a more premium design feel.

For the best smoke effect, high-quality incense sticks are recommended. Overly cheap, mass-produced incense sticks may produce excessive smoke, resin, or residue, thus affecting the clean, elegant smoke effect that this design aims to present.

This model can be printed without supports and has been practically tested with multiple incense sticks.

Print Notes

Tower / Tower body:
Print upside down, with the top Smoke-Cap adhering to the build plate.
No supports.

Base / Base:
Print with normal orientation.
No supports.

Signature Label / Identification label:
Print flat.
No supports.

B-Inlay / B-shaped inlay:
Print flat.
No supports.

Recommended Settings:

• Tower / Base: 0.20 mm for high quality, or 0.24 mm for faster printing
• Wall loops: 3 loops recommended, 2 loops can be used for a faster version
• Infill: 10–15%
• Material: PLA / PLA Matte tested
• Signature Label / B-Inlay: 0.12 mm Extra Fine recommended, 0.4 mm nozzle works fine for printing

Safety Note

This model has been practically tested with PLA and runs stably. However, do not leave burning incense unattended when in use. Please place it on a stable, heat-resistant surface, and keep it away from flammable materials such as curtains, paper, and furniture. After use, please wait for the model to cool down completely.