Floral decorative panels (Lily) Wall art

If you want to see other sets of paintings similar to this one, visit my profile.

Please read the instructions before printing

Item description:

This decoration represents a triptych of decorative panels with floral motifs (lily), a modern and minimalist interior design element

Main product features

• Geometric and floral design: The composition is divided into three distinct rectangular sections. The silhouettes represent flowers and leaves in a minimalist style (line art), with elegant visual continuity between the various modules

• Installation: Each panel has small pre-drilled holes on the upper and lower sides to allow stable fixing with simple nails, blending perfectly into the structure

It is a very versatile decorative solution, commonly used to enhance the headboard of the bed, the wall behind the sofa in the living room or to add warmth to the entrance of the house

Printing instructions:

Printed in Bambulab Black PLA

Printing is very easy and only consumes 48 grams of filament (1.60 millimeters thick)

Colors can be changed in the slicer at the time of printing, and the model can be enlarged or reduced as desired. Usually, 1.60 mm thickness is more than sufficient. So, if you enlarge it on the x and y axes, keep the “Uniform scale” function active, then to vary the thickness, uncheck “Uniform scale” and only adjust the z-axis value to the desired millimeters (I set 1.60 mm and it works perfectly)

GENERAL TIPS 

A tip I always give is to first clean the print bed with dish soap and a sponge, rinsing with hot water, then dry it with compressed air avoiding touching the surface with your hands. I also recommend performing the dynamic flow rate and flow rate calibrations provided in Bambu Studio. Personally, before printing, I dry the PLA with AMS 2 PRO for about 1 hour. It is these small precautions, along with many others, that determine the success of a beautiful print

Before leaving negative reviews, please adjust these parameters. If you have difficulties or continue to experience problems, do not hesitate to contact me, we will look for solutions together in a perfect collaborative atmosphere. I have made several prints of this object and they all came out perfect as in the photos: if you have incorrect parameters, dirty or clogged nozzles, poorly calibrated machines, damp or poor quality filaments, do not blame me.

PRINTING INSTRUCTIONS:

• Layer height 0.2 mm

• Initial layer height 0.2 mm

• Seam position aligned

• Wall loops 2

• Top shell layers 5

• Bottom shell layers 3

• NO supports

• Infill 15 %

• Grid pattern

• Outer wall speed 200 mm/s

• Inner wall speed 300 mm/s

• Normal print acceleration speed 10,000 mm/s

• Outer wall acceleration speed 10,000 mm/s