Apollo Kids Whiz Scooter – Steering Replacement

Steering Replacement Part – Apollo Kids Whiz Scooter

🇬🇧 English

The original steering component of our Apollo Kids Whiz children's scooter broke after some use (see photos). Since spare parts for this specific model are hard to find, I designed this replacement to restore the scooter to full function — saving it from the landfill. ♻️

Print Recommendations

• Material: ABS or ASA (strong, UV- and weather-resistant)
• ❌ Not recommended: PLA (becomes brittle, deforms in sun/heat)

• Infill: 15 % — sufficient in my test, but **30–50 % recommended
  for extra safety margin, especially for heavier kids

   

Files Included

• .3mf – ready-to-print with my tested profile
• .stp – STEP file for your own modifications/remixes

⚠️ Disclaimer / Use at Your Own Risk

This is a 3D-printed replacement part for a child's vehicle. Use entirely at your own risk. I accept no liability for any damage, injury, or accidents resulting from the use of this part. Please:

• Inspect the printed part carefully before each use
• Replace immediately if cracks or wear become visible
• Supervise children while riding
• Do not use if you are unsure about print quality or strength

If in doubt, consult the manufacturer for an original spare part.

🇩🇪 German

The steering component of the Apollo Kids Whiz children's scooter broke after some use (see pictures). Since spare parts for this model are hard to find, I designed this replacement part to make the scooter fully functional again — and save it from the trash. ♻️

Print Recommendations

• Material: ABS or ASA (stable, UV- and weather-resistant)
• Infill: 15 % — held up in my case, but **30–50 % recommended

Files Included

• .3mf – ready-to-print with tested profile
• .stp – STEP file for your own adjustments/remixes

⚠️ Disclaimer / Use at Your Own Risk

This is a 3D-printed replacement part for a child's vehicle. Use is entirely at your own risk. I accept no liability for any damage, injuries, or accidents arising from the use of this part. Please:

• Carefully check the printed part for cracks before each use
• Replace immediately if visible wear or cracks appear
• Supervise children while riding
• Do not use if in doubt about print quality or stability

If in doubt, ask the manufacturer for an original spare part.

License: CC BY-SA 4.0 – feel free to remix, but keep your version free under the same license. 🛠️