Carriage Dessert Tray/Cupcake Stand Remixed

Hi!

This a remix of https://makerworld.com/en/models/2408418-princess-carriage-dessert-tray-cupcake-stand-remix

I got inspired by the model but didn't like the cloud-shape top and wanted a rectangular top so that it would be a bit smaller and better suits some planned decoration items on top. I also changed the diameter of the pins for the wheels slightly to have a better fit (I didn't need a hammer, but depending on the force in your hands you might want to use one for a slight ‘smash’ to get it in). Hopefully you also will enjoy this remix as I do!

The displayed model is printed in Bambu Lab PLA Basic Black (10101).

Note, if you have a large print bed then you can move the “top plate” (plate 1) to the second plate ("Underparts") and print all items in one go.

How to assemble?

• Peel out the support part from within the wheels (where the little pins will go in)

   

• Combine the wheels and the little pins:

• Connect one side to the pins (note the thicker part of the side should be on the outside!):

• Connect the inner part (the “bottom” part for once the model would stand up straight) to one side:

• Connect the other side to the inner part:

• Connect the top plate (note that it should fit in the designated sleeves) and the model is ready. You may want to glue this with super glue so it can't fall off when using it: