#261 Roaring Dragon Head Resin Bust

A fierce dragon head bust with an open roaring mouth, long fangs, sharp horns, layered scales, and dramatic spiked crests. The sculpture stands on a simple display base, creating a powerful dark fantasy collectible piece.

If you're interested in the commercial use of my models, earlier access, exclusive designs or if you simply like my work and want to support me, please check out my Patreon at https://patreon.com/29flo and subscribe to a membership tier that suits you.

Print Difficulty level: [6/10]

[ Suggested Print Settings for 15-20 cm figurine ]
Nozzle: 0.2mm-0.4mm
Layer Height: 0.10-0.2mm
Infill: 5-25%
Wall loops: 2-3
Supports: Tree (auto)
Printed with: PLA

Printed with fuzzy skin effect: (optional)
Fuzzy Skin: Contour
Fuzzy Skin Point Distance: 0.05
Fuzzy Skin thickness: 0.05

[ Works well with: FDM (Filament) printers ]
[ Works best with: SLA (Resin) printers ]

The best quality of the printed figurine will, of course, be achieved by printing this model with resin, where all details will be fully preserved. However, with the right settings on an FDM printer, the result can also be excellent. Keep in mind that very small figurines are not suitable for FDM printing. For best results, it is recommended that the model be at least 15 cm tall when using a 0.4 mm nozzle. If you are using a finer 0.2 mm nozzle, you can experiment with significantly smaller sizes. Ultimately, the level of detail you achieve will depend on both your printer and your chosen settings.