Car & Camper Headrest Cupholder

Cupholder for mounting on the headrest – additional space for cups, cans, or bottles in the car or camper.

Description

In cars or campers, there is often a lack of additional, easily accessible space for drinks – especially in the back seat or living area.

This cupholder was developed precisely for this purpose.

The holder is mounted between the metal rods of the headrest and creates a stable space for:

• Cups
• Cans
• Bottles

This ensures that drinks remain within reach and securely positioned while driving or stationary.

Everyday Use

For mounting, the headrest is briefly removed.

Then:

1. Place the holder onto the headrest rods
2. Reinsert the headrest
3. Use the cupholder

The design is intended for normal driving conditions.

Construction

The model consists of two separate printed parts:

• Cupholder
• Headrest attachment part

Both parts are permanently glued together after printing.

The gluing serves to firmly connect the components.

Advantages

• additional drink space in the vehicle
• easy retrofit without drilling
• ideal for back seat or camper
• space-saving solution
• compatible with many drink sizes

Technical Data

• Mounting: Headrest rods
• Construction: Two-part, glued
• Height: approx. 69 mm
• Inner diameter: approx. 77 mm

Suitable for:
• Cups
• Cans
• Bottles up to approx. Ø 70 mm

Scope of delivery:
• 1 × 3MF file (two-part)

Assembly Note

Gluing is to be done by the user.

The selection of a suitable adhesive and its proper application are the user's responsibility.

Print Instructions

Recommended Material

• PLA or PLA+

Print Settings

• Layer height: 0.2 mm
• Support: not required
• Print orientation: as provided in the file