PXN GT One to Fanatec QR Lite, QR1 & QR2 Adapter
Print Profile(0)
Description
PXN GT One to Fanatec QR1 / QR1 Lite / QR2 Adapter (60mm Extension)
This adapter connects a PXN GT One Steering Wheel (50.8 mm pattern) to Fanatec QR1, QR1 Lite, and QR2 systems. It provides a 60mm extension for better clearance and ergonomics. The little notch on top is the top side of the QR
Slicer Settings
- Material: PETG
- Wall Loops: 8 (Ensures pillars are 100% solid)
- Top/Bottom Layers: 5
- Infill: 45% Gyroid
- Wall Generator: Arachne
- Fuzzy Skin: Contour (Distance: 0.3, Thickness: 0.2)
- Brim: 8 mm
Mounting Options
The design supports three hardware configurations:
- Brass Inserts: Use M5 heat-set inserts in the front face for standard short M5 bolts.
- Captive Nuts: Use the hexagonal recesses to hold M5 nuts internally.
- Pass-Through: Use 50mm–60mm M5 bolts to thread through the entire assembly.
Specifications
- Height: 60mm
- Wheel Side: 50.8 mm
- Base Side: Fanatec QR1 / QR1 Lite / QR2
- Print Weight: Approx. 157g
Installation Note: QR1 Lite Modification
This adapter is compatible with the QR1 Lite, but you must modify the QR. There is a small plastic lug/pin on the side of the QR face (used by Fanatec to detect "Low Torque Mode"). You will need to cut or trim this plastic piece off so that the adapter sits completely flush against the mounting surface.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)