Drumstick Holder — C-Clip | Suporte de Baquetas

## English

Snap-fit drumstick holder that clips onto a 35 mm drum rim,
cymbal stand, or rack tube. Holds 6-8 sticks. Tested in PETG
on Bambu Lab P2S.

**Features:**
- Internal Ø 35 mm with 0.3 mm press-fit
- 2 internal snap-fit detents (audible click)
- Tapered body (100×90 → 78×70 mm)
- Self-supporting 45° chamfer at the clip base
- Parametric — full OpenSCAD source included (GPL 2.0)

**Print:** ~5h18, 162g PETG, 0.28mm layer, 15% gyroid,
tree organic support inside cavity, 8mm brim. Print orientation:
open end down on the bed.

---

## Portuguese

Snap-fit drumstick holder for drum rims, stands, or rods up to 35 mm in diameter. Holds 6-8 drumsticks. Tested in PETG on Bambu Lab P2S.

**Features:**
- Internal Ø 35 mm with 0.3 mm press-fit
- 2 internal snap-fit detents (audible click)
- Tapered body (100×90 → 78×70 mm)
- Self-supporting 45° chamfer at the clip base
- Parametric — OpenSCAD code included (GPL 2.0)

**Print:** ~5h18, 162g PETG, 0.28mm layer, 15% gyroid,
tree organic support inside cavity, 8mm brim. Print orientation:
open end down on the bed.

---

## License / License

- **OpenSCAD source code** — GPL 2.0
- **3D model files (STL/3MF)** — CC-BY-SA 4.0

Free to use, modify, and **sell** prints. Modifications must be
shared under the same license. Credit: **Studio Lovani**.

Free to use (including commercial). Modifications must be
shared under the same license. Credit: **Studio Lovani**.