LX-LIAC45 bi-directional PD 45w module panel mount

Panel mount for the LXCRU LX-LIAC45 bi-directional buck-boost PD 45w module panel mount.

The module I bought have its main IC label lasered off, but based off the pin arrangement it must be using the IP2369 chip.

This time, I created a lid that also doubled as indicator LED partition so the design is cleaner than my other 45w module panel mounts.

Similar to my other design for IP2369 modules, this also have enough space to install heat-sink on bottom of the board. 

The design have 4 models included:

• Inner cradle for the board
• Outer panel for presentation
• Cutout template to help draw lines on the panel you need to cut
• Lid double as LED partition

To install the board to the mount, you'll need 2 or 3 M2 plastic screw, and for mounting to your panel you'll need 2 M3x8 or longer machine screw and 2 M3 nuts.