Desert dune decorative wall panels

Please read the instructions before printing

Item description:

The image shows three modular three-dimensional decorative wall panels placed diagonally, characterized by a geometric pattern of sinuous waves in relief. Excellent for interior design. They can be joined adjacently or slightly separated (see photo).

Product Features

• Design: The wavy surface creates a modern play of light and shadow that simulates the movement of sand dunes or water waves.

Printing instructions:

Printed in PLA Desert Tan Matte Bambulab. 

Printing is very easy. The supports are only for the back holes and detach with extreme ease.

Colors can be changed from the slicer at the time of printing.

If you enlarge or reduce the panels, be aware that the negative objects Kayhole (the back holes) will enlarge/reduce accordingly, so you must select each object named Kayhole and restore its original size (x 9.50 mm, y 21.86 mm, z 3.00 mm), then move the Kayhole objects so that they pierce each panel as shown in the photo.

GENERAL ADVICE 

A tip I always give is to first clean the print bed with dish soap and a sponge, rinsing with hot water, then drying it with compressed air, avoiding touching the surface with your hands. I also recommend performing the dynamic flow rate and flow rate calibrations provided in Bambu Studio. Personally, before printing, I dry the PLA with AMS 2 PRO for about 1 hour. These small measures, along with many others, are what determine the success of a good print.

Before leaving negative reviews, please adjust these parameters. If you have difficulties or continue to encounter problems, do not hesitate to contact me; together we will find solutions in a perfect collaborative atmosphere. I have made several prints of this object, and they all came out perfect as in the photo: if you have incorrect parameters, dirty or clogged nozzles, poorly calibrated machines, or damp or poor quality filaments, do not blame me.

PRINTING INSTRUCTIONS:

• Layer height 0.2 mm

• First layer height 0.2 mm

• Seam position aligned

• Wall loops 2

• Top shell layers 5

• Bottom shell layers 3

• Supports Yes

• Infill 8 %

• Infill pattern Grid

• Outer wall speed 200 mm/s

• Inner wall speed 300 mm/s

• Normal print acceleration 10,000 mm/s

• Outer wall acceleration 10,000 mm/s