Reximex Mito/RP picatinny rail gas cylinder

I adapted the original design for a bipod mount to accommodate my viperay laser on the updated Mito design. 

To attach this you will need 2 x 3mm allen bolts.

Due to the small size of this accessory and the rigidity og the material, for fully secure, I would recommend the use of double sided tape. this easily comes off the cyclinder, should you wish to remove it. Without the tape, I found that the slightest nudge would alter the laser alignment. ABS appears to be less flexible than petg or pla. I haven't tried asa.