Emboss & Engrave Depth Calibration Plate
Print Profile(1)
Description
This model is a simple little calibration plate I made in Tinkercad. It serves a multipurpose function: The squares and text on the left-hand of the model test out different embossing heights for text and features on a model. at 0.2mm layer heights, they are 1, 2, 3, 4, and 5 layers above the baseplate. On the right hand side, there is the opposite, with 1, 2, 3, 4, and 5 layer deep engravings. There is also a simple gradient/layering test on the bottom edge, with 1:1 (45°), 1:2 (63°), 1:3 (71.5°), and 1:4 (76°) ramps. The embossing side has ironing, while the engraving side does not. It also comes with a little handle/loop to hold/hang it by.
I also used Arachne walls to get higher fidelity small text.
You MUST use 0.2mm layers! The print will be rendered near useless if you use any other layer height as the emboss and engrave heights rely on multiples of 0.2mm/
Hopefully somebody finds this model useful! It's literally the first 3D model I've ever made lol.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including, but not limited to, publishing derivative works outside the Makerworld platform or hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money or collect fees. Subject to the above restrictions, derivative works may be published only within the Makerworld platform, and all such derivative works must be licensed under the same SDFL‑C license, without modification or additional terms. You may download the digital versions of this object, 3D print it, and display images, videos, or usage demonstrations of 3D printed versions of the object on personal social media platforms or Makerworld official channels, provided that no digital versions of the object are shared or distributed.
Comment & Rating (0)