Balance Game RaMaJoJo little companions

🧩 RaMaJoJo´s Tactical Balance Game

A clever balance game for the whole family! Tactical, exciting, and perfectly optimized for 3D printing. Will you make the companions stand or cause the board to collapse?

📸 Discover more & order originals: @ramajojo.official

⚡ The Game Principle & Highlights

• The Weight Secret:} All figures look visually identical but weigh completely differently (controlled via infill). A deceptive fun!
• Green Tiles:} Tactically block fields on the board. Where a tile lies, no companion may stand.
• Original Upgrade:} Use the printed set or expand it with our original RaMaJoJo companions in the mystery bag including an affirmation card (orderable via Instagram).
• Extended Rule:} Draw an affirmation card face down, internalize positive energy, choose the appropriate companion, and balance!

🎮 Quick Guide

1. Set up the base and distribute green tiles as blockades.
2. Shuffle figures face down/blindly.
3. Alternately place one figure on a free space.
4. Whoever causes the board to tip loses!

🛠️ Technical Guide & Print Settings

🔧 Assembly

• Clever Plug-in System:} The playing surface is simply plugged onto the hemisphere with the connector.
• No glue needed!} It holds on its own and remains disassemblable. If desired, it can be permanently glued.

Tip: Use Gyroid infill and keep the walls everywhere consistent (e.g., 3 walls). Printed from the same filament, the weight difference is not visible from the outside!

🚀 Tip for MakerWorld points:} Use my .3mf print profile! The infill levels are already perfectly pre-set per object in Bambu Studio – just open and click "Print" directly!