Print Profile(1)
Description
I wanted to make a five vial peptide box that required no hardware that was simple and functioned with a friction fit and made it easy to dispense. I would recommend using PLA or the Polymaker HT PLA. I may add a larger capacity model depending on the demand and input. I did not print with a high infill to keep the outer shell somewhat flexible while the stud sanps into place. Depending on your settings, you may need to “break it in” by opening and closing it a few times. I went with 0.2mm layer height to keep everything clean. Let me know if you have any questions!
This is for 3ML vials. May do something for larger if there is enough requests.
Have fun and be safe!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (6)