Steam Controller 2/2026 Controller/Puck Wall Base - Free 3D Print Model

Search models, users, collections, and posts

Kyle Altendorf

Hobby & DIY>Electronics

IP Report

Print Profile(1)

All

X1 Carbon

H2D

H2S

H2C

A1 mini

X1E

X2D

P1P

P2S

P1S

H2D Pro

A2L

v22 0.2mm layer, 2 walls, 15% infill

Designer

2.3 h

1 plate

5.0(2)

Open in Bambu Studio

Boost

Released

Description

Summary

For use with: Steam Controller 2 / 2026 controller and puck
Original model: v22 https://cad.onshape.com/documents/abcfa860fce3c1530917d40e/w/6bd5c74e5166da8c143027b3/e/f1030ed5efce4eb12c99f24f
Matching style: https://makerworld.com/en/models/1558905-8bitdo-ultimate-controller-dock-wall-base
Secure latch holds the puck in place while keeping the controller easy to grab
Designed for a clean wall-mounted controller setup

What makes this model special?

Clean, stealth design - A minimal wall base that gives both the Steam Controller and puck a dedicated home without adding visual clutter.
Secure puck latch - The puck latches into place so it stays put during normal use, while the controller remains easy to pick up and set back down.
Matching wall-mount style - This follows the same simple, desk-clearing approach as my 8BitDo Ultimate Controller Dock Wall Base: move the controller and puck off the desk, keep them within arm’s reach, and maintain a cleaner gaming setup.

Assembly

I mounted mine using 3M Command strips. If you prefer screws, the model includes partial mounting holes that can be opened up for screw mounting. Latch the puck into the base, route the cable as desired, and place the controller on the puck as normal. Consider using a 90deg or 180deg degree USB-C adapter or cable for a cleaner fit.

Comment & Rating (12)

@user_1613932479

Hi, I really like this design and it printed really well but unfortunately the puck seems to be too recessed and the controller doesn't charge. Seems like the pins are not making good contact. Hopefully it's an easy fix and this will be a 10/10 dock.

The designer has replied

@altendky

Hey, thanks for giving this a try and for the helpful feedback. I'm _really_ sorry for the wasted print. :[ I'm traveling this week but I do have my controller and access to a printer here so I'll try to get this explored and addressed.

(Edited)

@altendky

Just an update, progress last night but I need to check a couple other things before posting the updated model. Hopefully tonight.

(Edited)

@altendky

i removed the original print profile and added a new one. it is labeled v22, that's the version over in onshape. i'm sorry for the wasted print and the extra wait. i hope this works smoothly for you.

@SkyeTigress

Print Profile

v22 0.2mm layer, 2 walls, 15% infill

Worked Flawlessly. Controller sits nice and the puck is securely held in place. I used some double sided tape to secure it just below my monitor to its stand.

The profile uploader has replied