8BitDo Ultimate Controller Dock Wall Base

Summary

• For use with: 8BitDo Ultimate series controller charging docks https://www.8bitdo.com/#Products
• Original model: https://cad.onshape.com/documents/69235a301b5b6092586b10a6/v/31d9cd9d1d63b89837bf9119/e/032a8d980a68ee9892fb0bd5?renderMode=0&uiState=68603eb43790d57313001ecb
• filament used: 40g
• print time: 2 hours on X1C

What makes this model special?

• Clean, stealth design - This smooth, minimal wall shelf practically disappears behind your original charging dock and controller, maintaining that premium aesthetic you want in your battlestation.
• Drop-in compatibility with 8BitDo Ultimate original and Ultimate 2 gaming controller charging docks. Zero modifications needed - just mount and go! Your original cable fits perfectly, and the wireless receiver still slots right into the bottom of the base as with the stock bottom cover.
• Reclaim your desk space while keeping your controller within arm's reach. Finally achieve that clean, organized gaming setup you've been dreaming of - no more cluttered surfaces, just pure gaming zen.

Printing

• If slicing yourself, please keep in mind that the orientation of the receiver compartment door is critical so as to avoid layer adhesion related failures.

Assembly

I have mounted mine using 3M Command strips.  If you prefer screws, there are  two partial holes printed in place which should be readily opened to mount with screws.  The holes in the shelf can be used to feed, wrap, or strap cables as you prefer.