Cover Plug for Bambu P1P and P1S
Copyright Claim
Cover Plug for Bambu P1P and P1S
Boost
58
86
81
Print Profile(2)
0.08mm layer, 4 walls, 15% infill
Designer
14 min
1 plate
![[MiniFriendly]: 0.08mm layer, 4 walls, 15% infill](https://makerworld.bblmw.com/makerworld/model/USc3c566454ed50a/52301522/instance/2024-02-21_7fc43a2603bcd.jpg?image_process=resize,w_100/format,webp)
[MiniFriendly]: 0.08mm layer, 4 walls, 15% infill
19 min
1 plate
Boost
58
86
81
0
310
297
Released
Description
UPDATED: Narrowed cover slightly to reduce interference with glass lid on P1S. - V2 Version
Cover plug to fill the hole on the top of the Bambu Labs P1P and P1S. Clips into place easily.
I printed it in PLA at 0.28mm Super draft and it looks good. No supports needed.
Comment & Rating (81)
All
Print Profile
0.08mm layer, 4 walls, 15% infill
printed very well
1
Reply
Print Profile
0.08mm layer, 4 walls, 15% infill
尺寸準
0
Reply
Print Profile
0.08mm layer, 4 walls, 15% infill
worked perfectly as expected. Print profile works without any changes.
0
Reply
Print Profile
0.08mm layer, 4 walls, 15% infill
It is ok.
0
Reply
Print Profile
0.08mm layer, 4 walls, 15% infill
fits perfectly, love that it snaps into place as well!
0
Reply
working well, I print it with Polymaker Polylite ASA
0
Reply
Print Profile
0.08mm layer, 4 walls, 15% infill
Nice cover
0
Reply
Print Profile
0.08mm layer, 4 walls, 15% infill
sehr geil. tolle Datei. danke👍
0
Reply
Print Profile
0.08mm layer, 4 walls, 15% infill
Excellent print and very useful. Helps keep the enclosure at proper temp when printing materials that require it. Thanks!
0
Reply
Print Profile
0.08mm layer, 4 walls, 15% infill
nice
0
Reply
© 2024 MakerWorld