Brutalist Mini Terrain - Precinct Gate
Print Profile(1)
Description
Boost Me (for free)
If you like these and find them useful, please consider giving me a boost!
A set of Brutalist-inspired terrain to use in your favourite wargaming table top games! Gate Edition. Clean and weathered gate included
Intended to be used with the walls found in “Brutalist Miniature Terrain - Precinct Walls” (https://makerworld.com/en/models/2578852-brutalist-miniature-terrain-precinct-walls#profileId-2844012)
All parts are printed with no supports, except for the main gate which needs a small support for the hinge. All these models were printed at 0.16mm standard-quality settings on an A1 Mini, though would be perfectly fine at 0.2mm too if you want it a bit faster.
ASSEMBLY: Once the gate covers are glued to the main doors, cut two 9cm lengths of 1.75mm filament. Assemble the doors into position on the main body, and insert the filament section through the door and body hinges, up into a dedicate pocket near the top of the body. Depending on your printers tolerances, the tip of some holes may need to be widened slightly to allow the filament section through. Glue isn't needed, can can be used either top of bottom of the filament section to keep it all together
If you find these useful please comment and let me know and I will aim to make more in the future. I always love to see them in action too!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)