Blue and Yellow macaw Chibby & MINI, eyes in glass

Chibby Blue and Yellow macaw, also as MINI & eyes in glass - fun and versatile design perfect also as magnet or key chain!
Want me to upload more free designs? Give it a boost then!
See my other articulated designs here

• Easy and quick to print: Ready to print directly, with no adjustments or assembly needed afterward.
• No post-processing required: Just hit "print" and enjoy your finished model immediately!
• Pre-painted versions included, whether with printed eyes or glass eyes.

MINI-version:

• Size: 60mm, ideal as fidget and keychains.
• Tested down to 83% (50 mm) of original size, smaller joints may become fragile depending on printer settings. 
• You may need to use a brim depending on your print settings so the wings don’t get knocked over.

Chibby version:

• Size: 100% scale is 82 mm high and can be scaled down to 75% of the original size.
•  
• Available with either printed eyes or glass eyes!
  Sizes for eyes, tested at 0.2mm layer height:
  76% = 6mm eyes
  100% = 8mm eyes
  125% = 10mm 
  151% = 12mm

This model is one of several in my parrot model series launching this spring!
Each available in both mini and Chibby versions, all chibby versions featuring eyes in glass!
Every model in the series will be released exclusively on Makerworld.

Let me know if you need any further adjustments!

Have fun printing and don't forget to share your prints!!

Like the design? 

Show it some love and give it a boost!

Check out my other designs, including dragons, stingrays, and more here!

Recommended printing settings:

Wall: 3
Layer Height: 0.2 mm
Infill: 5-15% gyroid or similar infill
Support: Not needed
Brim: Use 5mm mouse-ear if needed