300mah ph1.25 BATTERY BOX VOLTANEX CORSAIR RCPLANE
Print Profile(1)
Description
300MAH PH1.25 BATTERY BOX FITS PERFECTLY IN COCKPIT AS SHOW. CAREFULLY REMOVE THE COCK PIT SHIELD AND FOAM PILOT TO MAKE ROOM FOR BATTERY BAY. SALVAGE FRONT PORTION OF SHIELD AND RE ATTACH AS SHOWN. THE CAMERA MOUNT FOR THE WOLFWHOOP WT03 IS AVAILABLE ON MW. https://makerworld.com/en/models/1682108-umx-conscendo-mount-for-wolfwhoop-wt03-fpv-camera?from=search#profileId-1782129 BOX SHOULD BE ADHERED WITH HOTGLUE. IT IS SUGGESTED TO FILL SMALL VOID IN COCKPIT TO LEVEL OUT WITH EDGES BEFORE GLUING DOWN…CARDBOARD OR SPARE FOAM IS BEST..BATTERY IS FRICTION FIT DUE TO PERFECT TOLERANCES BUT IT IS ADVISED TO USE TWO D TABS ON OPEN SIDE TO SECURE BATTERY WHILE FLYING. TWIST TIE OR MICRO ZIP TIE WOULD WORK BEST.. USE 2 MICRO ZIP TIES IF U GO THAT ROUTE.. CLIP ONE LOCK OFF ONE AND FEED OTHER THOUGH D TAB OPENING AND SECURE OTHER SIDE WITH CLIPPED LOCK FROM OTHER ZIP TIE.. DO NOT LOOP. OF COURSE ZIP TIE WILL HAVE TO BE CUT TO REMOVE BATTERY BUT THEY ARE NOT THAT EXPENSIVE…I OPTED OUT OF A LATCH OR SOME FRICTION SNAP TO REDUCE WEAR ON BOX… HAPPY FLYING
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including, but not limited to, publishing derivative works outside the Makerworld platform or hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money or collect fees. Subject to the above restrictions, derivative works may be published only within the Makerworld platform, and all such derivative works must be licensed under the same SDFL‑C license, without modification or additional terms. You may download the digital versions of this object, 3D print it, and display images, videos, or usage demonstrations of 3D printed versions of the object on personal social media platforms or Makerworld official channels, provided that no digital versions of the object are shared or distributed.
Comment & Rating (0)