Print Profile(1)
Description
.2mm nozzle & AMS required!
Buffalo Sabres Earrings - two different logos (Goathead & Shield). You'll need a .2mm nozzle and an AMS to print these. Make sure your build plate is super clean - especially if using a smooth build plate. I tested these with both a smooth and textured plate and they came out fine either way. Print time is longer due to the .2mm nozzle and the multiple color swaps. All in all, I was happy with the way these turned out. Give it a try if you're close to someone who love the Sabres!
You will also need an earring kit for the hoops etc. I got a cheap one from Amazon and it worked fine. LETS GO BUFFALO!
Update 5/13/2026 - added a Sabretooth earring to the set. Also refind the shield logo earring to minimize bleeding.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (3)