Pool Noodle Foam Sword by Motome

Motome

Props & Cosplays>Cosplay Weapons

IP Report

Print Profile(4)

All

P1S

P1P

X1 Carbon

X1E

H2D

A1 mini

0.2mm layer, 2 walls, 15% infill

Designer

3.2 h

1 plate

4.9(35)

PLA 0.2mm layer, 2 walls, 15% infill

Designer

3.5 h

1 plate

4.7(3)

A1 Mini 0.2mm nozzle, 0.1mm layer, 4 walls, 15% infill

Designer

15.8 h

2 plates

ABS 0.2mm layer, 2 walls, 15% infill

Designer

3.6 h

1 plate

Open in Bambu Studio

Boost

873

1996

833

467

Released

Description

This is a foam sword hilt that can be printed and assembled with zero supports or glue. It is designed to be fitted to a pool noodle for fun but safe sword play.

Comment & Rating (54)

@Micky_Dogenz

Boosted

Print Profile

PLA 0.2mm layer, 2 walls, 15% infill

Printed perfectly. The tabs all worked great. Currently printing a gold set. The tabs worked great. I broke one, but that's from being an impatient klutz! Take a second and make sure it's lined up properly before just smashing it like the Hulk and you'll be fine.

@LuckyMtnMan

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Great!

@sig.ness

Print Profile

PLA 0.2mm layer, 2 walls, 15% infill

Easy print & fit together perfectly! Had one failure of the small clips due to my print bed, not the model. (it was the 4th time printing & I've had adhesion issues with that filament before. Definitely a problem on my end) A little glue stick in that area assured it wouldn't happen again. The kids will love these Easter presents. 🙂

@hedgehogginitup

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

my son and his little friend absolutely love it! it's definitely made playing at the park a lot safer since they want to play with the swords and not sticks.

@tennisgent

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Works great. I feared the noodle would slide off easily but it holds really strong, even while my kids are dueling around the house. Very impressive.

@user_3108918871

Print Profile

0.2mm layer, 2 walls, 15% infill

made these for my two great-nephews. Great print and easy to put together. Will add photo after they are gifted to the boys, if they stay still long enough!

@user_3491278548

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

printed two so far. these turned out amazing! I still added a few dabs of glue here and there to keep it tight. thanks for a great model!

@RobPrints3D

Print Profile

0.2mm layer, 2 walls, 15% infill

This came out great!! Very surprised it worked out so well - thanks !!

@user_3172147927

Print Profile

0.2mm layer, 2 walls, 15% infill

@Gantrovon

where are the Lego lightsaber hills from? I don't see them anywhere.

@KatieQueenofAll

Print Profile

0.2mm layer, 2 walls, 15% infill

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.