Billy Idol album cover Hueforge
Print Profile(1)
Description
you can change the size of the model, just dont change hte height
Project: billy idol.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm
This print uses 5 different filaments, if you dont now how to use more than 4 with one ams look up how to.
The Model is 230x230mm in size
You may print at higher layer heights below the Base Thickness of 0.4mm
The Max allowed Thickness is 2.4mm and the Actual Thickness is 2.24814mm
#000000 PLA BambuLab Basic Black Transmission Distance: 0.6
#545454 PLA BambuLab Basic Dark Gray Transmission Distance: 0.6
#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5
#c00d1e PLA BambuLab Basic Red Transmission Distance: 4
#fce300 PLA BambuLab Basic Yellow Transmission Distance: 6
This print uses 5 unique filaments
Swap Instructions:
Start with BambuLab Basic Black
At layer #6 (0.64mm) swap to BambuLab Basic Dark Gray
At layer #10 (0.96mm) swap to BambuLab Basic Jade White
At layer #16 (1.44mm) swap to BambuLab Basic Red
Border Only Colors from here until the end. the yellow isnt only on the border
At layer #22 (1.92mm) swap to BambuLab Basic Yellow
At layer #31 (2.64mm) swap to BambuLab Basic Jade White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)