V Grip Vice pads for Irregular Shapes (fits 4" 5")
Print Profile(1)
Description
I had one of these that I purchased a while back, but it only had angled slots, and I ended up melting it when my material heated up. I decided to make this set of v-groove jaws for both 4-inch and 5-inch vices. If it breaks/melts, I'll just print another.
Features:
- Adjustable 8x2mm magnet holes for attachment. To adjust the magnet size, go to object mode and change the size and position of the cylinders. See the picture above.
- Mirrored so the slots line up.
- 3 or 4 different-sized vertical V grooves
- 2 horizontal v-grooves
- 6 wall loops for extra strength
- 25% gyroid infill (switch to 100% rectilinear if you want it as strong as possible.)
- Printed in PLA for mine, but you may want to print it in Nylon or PETG for strength.
- Added Plates 3 and 4 with wider 60-degree angles which might be better. We'll see.
Thanks
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (4)