[BaBo Duo System] AMS + Tetras Adapter

Using and loving the Babo Duo system, I wanted to keep my existing modules and be able to use the Eibos Tetras with the AMS while maintaining the original design

So I modeled this adapter that allows mounting the Tetras elements directly onto the adapter while remaining compatible with the Babo Duo modules

Assembly ;

1- Assemble the frame with 8 M3x8mm screws (2 at each corner)

2- flip the frame and position the cables (pay attention to the cable direction, the “Heater” part should be outside)

3- Slide the “power module” from outside to inside (some screws protrude a little but it fits with slight force)

4- Secure the “power module” using the screws originally provided with the Tetras

5- at this stage, connect the USB-C ports to the power module

6- Unscrew the 4 screens from the original retaining plate (remove the 3 retaining screws)

7- Flip the frame and insert a screen into the designated slot 

8- secure the screen with the original screws then pass and connect the cable to the screen

9- Repeat for the 3 other screens

10-  (optional) position the frame on your existing modules and secure it with M3x8mm screws

11- Position the AMS on the frame and connect the cables to the “Heaters”

There you go, it's finished :