guslegend

cover

plate_1.png

eac2b1076e0e8f2e.png

0.2mm layer, 2 walls, 15% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<boostme><boosttitle>Boost Me</boosttitle><boostcontent>Want me to make your favorite model ?<br>Ask and you shall Receive it</boostcontent></boostme><h3><strong>Print Specifications</strong></h3><ul><li><strong>Total Print Time:</strong> ~1h 47m (Model: 1h 26m | Prep: ~20m)</li><li><strong>Filament Required:</strong> ~33.94g / 11.20m</li><li><strong>Supports:</strong> Minimal (only 2.88g of support material used)</li><li><strong>Filament Changes:</strong> 1 (Single color print)</li><li><strong>Estimated Material Cost:</strong> $0.85 (based on standard pricing)</li></ul><h3><strong>Print Settings Recommendations</strong></h3><ul><li><strong>Material:</strong> PLA / PETG</li><li><strong>Infill:</strong> Standard (15-20%)</li><li><strong>Layer Height:</strong> 0.2mm (recommended for the best balance of speed and detail)</li><li><strong>Wall Loops:</strong> 2-3</li></ul><h3> </h3>

Print Profile(1)

Description

Print Specifications

Print Settings Recommendations

Comment & Rating (0)

License

Related Models