Omada ER7206 and ES210X Rack mount, 1U

I bought a 2.5G network switch for my rack and I had to rearrange some things.  This is a 1U shelf that holds an Omada ER7206 router on the right, and the ES210X on the left.  I got inspiration from the original mount I had that held the router and network controller, but beefed this one up a little bit because the old one sagged some.  You will need 2 M4x20 SHCS bolts and 2 M4 nuts to hold the 2 parts together in the middle.  I would recommend NOT printing this out of PLA due to the heat, but it may work.  I used PETG.