EFFE Solution

cover

20260421_060720[1].png

20260427_173417[1].png

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<h2>Vaso Bambù Nodo – Due Versioni</h2>Vaso ispirato a una sezione di bambù, con dettaglio del nodo laterale.Progettato per stampa semplice con nozzle 0.6 e layer alti, senza necessità di supporti.<h2>VERSIONI INCLUSE</h2>1. Versione Solida (pronta stampa)<ul><li>interno già svuotato (~1.28 mm totale)</li><li>bordo superiore inspessito</li><li>più robusta e consistente</li></ul>2. Versione Parametrica (full solid)<ul><li>completamente piena</li><li>controlli tu pareti e riempimento</li><li>ideale per adattare peso e resistenza</li></ul><h2>PRINT SETTINGS (testati)</h2>Nozzle 0.6 mmLayer Height 0.3 mmWall Loops 2–4 (aumentare per uso con acqua)Infill 0–15% oppure 0% solo paretiSupporti Non necessari<h2>USO CON ACQUA (IMPORTANTE)</h2>Per contenere acqua:<ul><li>usare almeno 4 wall loops</li><li>aumentare i bottom layers</li><li>opzionale: sealing interno</li></ul>👉 con 2 pareti non è impermeabile<h2>NOTE TECNICHE</h2><ul><li>Versione svuotamento 0.64 × 2 (≈1.28 mm totale)</li><li>Bordo superiore rinforzato per maggiore rigidità</li></ul>Se lo stampi, condividi configurazione e risultato 👍

<h2>Bamboo Knot Vase – Two Versions</h2>Vase inspired by a bamboo section, with a side knot detail.Designed for simple printing with 0.6 nozzle and high layers, no supports needed.<h2>VERSIONS INCLUDED</h2>1. Solid Version (ready to print)<ul><li>internal already hollowed out (~1.28 mm total)</li><li>thickened top edge</li><li>more robust and consistent</li></ul>2. Parametric Version (full solid)<ul><li>completely solid</li><li>you control walls and infill</li><li>ideal for adjusting weight and strength</li></ul><h2>PRINT SETTINGS (tested)</h2>Nozzle 0.6 mmLayer Height 0.3 mmWall Loops 2–4 (increase for use with water)Infill 0–15% or 0% walls onlySupports Not necessary<h2>USE WITH WATER (IMPORTANT)</h2>To hold water:<ul><li>use at least 4 wall loops</li><li>increase bottom layers</li><li>optional: internal sealing</li></ul>👉 with 2 walls it is not waterproof<h2>TECHNICAL NOTES</h2><ul><li>Hollowed version 0.64 × 2 (≈1.28 mm total)</li><li>Reinforced top edge for greater rigidity</li></ul>If you print it, share your setup and result 👍

Print Profile(0)

Description

Bamboo Knot Vase – Two Versions

VERSIONS INCLUDED

PRINT SETTINGS (tested)

USE WITH WATER (IMPORTANT)

TECHNICAL NOTES

Comment & Rating (0)

License

Related Models

BAMBOO KNOT VASE - Two Versions